604 Acrylic Urethane Enamel - 2 Pack

604 Acrylic Urethane Enamel - 2 Pack
Brand: Protec
Product Code: 604
Availability: In Stock
   - OR -   

604 ACRYLIC URETHANE ENAMEL is a high performance, two pack acrylic urethane coating.  It has been developed in Australia for Australian conditions and has superior resistance to UV degredation when compared to most imported similar products.  Although it can be low baked, its extremely fast curing properties allow it to air dry satisfactorily at normal ambient temperatures.  In addition, its unique formulation and solvent balance allows it to be used with conventional one pack primers and putties.  It can also be supplied direct to clean baked enamel and two pack enamel surfaces.  Maximum adhesion to these surfaces is achieved after a light sand.

604 ACRYLIC URETHANE ENAMEL is a fast drying product suitable for the repair and refinish of motor vehicles.

SUITABLE PRIMERS
408 – Epotec Primer
443 – Parafill HS
464 – Parathon Primer/Surfacer
466 – Parabuild ICF

DRYING
Dust Free            5 minutes
Touch Dry            15-20 minutes
Dry to handle     4 Hours

604 ACRYLIC URETHANE ENAMEL is a two component system
4 parts 604 Pack A
1 part 604 Pack B

THINNING
604 ACRYLIC URETHANE ENAMEL should be thinned with R125 Reducer to a ratio of 1 part volume mixed paint to 0.30 parts by volume thinners (30%) for SOLID colours.  METALLIC colours should be thinned with R125 Reducer to a ratio of 1 part volume mixed paint to 0.25 parts by volume thinners (25%)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: